Processor	80486DX4
Processor Speed	100(internal)MHz
Chip Set	ACC
Video Chip Set	None
Maximum Onboard Memory	52MB
Maximum Video Memory	None
Cache	None
BIOS	Unidentified
Dimensions	96mm x 90mm
I/O Options	Floppy drive interface, IDE interface, parallel port, serial ports (2), utility connector, PC/104 connectors (2)
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
Memory upgrade connector	CN1	Power connector	J7
Serial port 1	J3	Floppy drive interface	J8
Parallel port	J4	Serial port 2	J9
Utility connector	J5	PC/104 connector	P1
IDE interface	J6	PC/104 connector	P2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	W1	Unidentified
»	Factory configured - do not alter	W3	Unidentified
»	Factory configured - do not alter	W6	Unidentified
»	Factory configured - do not alter	W7	Unidentified
»	Factory configured - do not alter	W8	Unidentified

DRAM CONFIGURATION
Size	Bank 0	CN1
4MB	4MB	Not installed
52MB	4MB	48MB module installed
Note: Bank 0 is factory installed and is not configurable.

SOCKET S0 SELECTION
Type	W2	W4	W5
27C64	3 & 4, 6 & 7, 8 & 13, 9 & 14	1 & 2	Open
27C128	3 & 4, 6 & 7, 8 & 13, 9 & 14	1 & 2	Open
28C64	3 & 4, 6 & 7, 8 & 13, 9 & 14	1 & 2	Open
27C256	3 & 4, 5 & 10	1 & 2	Open
27C512	3 & 4, 5 & 10, 9 & 14	1 & 2	Open
27C010	3 & 4, 6 & 7, 8 & 13, 9 & 14	1 & 2	Open
27C020	3 & 4, 6 & 7, 8 & 13, 9 & 14, 10 & 15	1 & 2	Open
27C040	3 & 4, 9 & 14, 10 & 15, 12 & 13	1 & 2	Open
27C080	2 & 7, 3 & 4, 9 & 14, 10 & 15, 12 & 13	1 & 2	Open
Note: Pins designated should be in the closed position.