DANPEX CORPORATION
ET-509
|
Card Type |
Translator |
|
NIC Type |
Ethernet |
|
Network Transfer Rate |
10Mbps |
|
Topology |
Linear Bus/Star |
|
Wiring Type |
Unshielded twisted pair RG-58A/U 50ohm coaxial |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
RG-58A/U 50ohm coaxial connector |
CN1 |
DC power in |
CN3 |
|
Unshielded twisted pair connector |
CN2 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
| » |
SQE test disabled |
JP1 |
Pins 2 & 3 closed |
|
SQE test enabled |
JP1 |
Pins 1 & 2 closed | |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
P/U |
Unidentified |
Blinking |
Power is on and transceiver is transmitting to or receiving from the unshielded twisted pair connector |
|
P/U |
Unidentified |
Off |
Power is off or transceiver is not transmitting to or receiving from the unshielded twisted pair connector |
|
LNK |
Unidentified |
On |
Network connection is good |
|
LNK |
Unidentified |
Off |
Network connection is broken |
|
COL |
Unidentified |
On |
Coaxial connector improperly terminated |
|
COL |
Unidentified |
Off |
Collision has not been detected |
|
COL |
Unidentified |
Blinking |
Collision has been detected |
|
BNC |
Unidentified |
Blinking |
Transceiver is transmitting to or receiving from the coaxial connector |
|
BNC |
Unidentified |
Off |
Transceiver is not transmitting to or receiving from the coaxial connector |
|
Note:The exact locations of each LED are unidentified. | |||