EICON TECHNOLOGY CORPORATION
DIVA T/A ISDN MODEM
|
Card Type |
ISDN Modem |
|
NIC Type |
ISDN |
|
Maximum Onboard Memory |
4KB |
|
Boot ROM |
Unavailable |
|
Network Transfer Rate |
230.4Kbps |
|
Topology |
Star |
|
Wiring Type |
RJ-45 ISDN BRI |
|
Data Bus |
External |

|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
25-pin DTE serial port |
CN1 |
RJ-11 analog phone interface |
PH1 |
|
Power connector |
CN2 |
RJ-11 analog phone interface |
PH2 |
|
RJ-45 ISDN interface |
ISDN | ||
|
USER CONFIGURABLE SETTINGS | ||
|
Setting |
Label |
Position |
|
Resistance set to 100Ohm (connection span >75meters) |
SW1 |
On |
|
Resistance set to 50Ohm (connection span <75meters) |
SW1 |
Off |
|
Note: Switch available on S/T models for Australia only. Termination requirements vary according to the number of devices connected to the NT1, and the distance between devices and NT1. | ||
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
B1 |
Unidentified |
On |
B-channel 1 connection is good |
|
B1 |
Unidentified |
Blinking |
B-channel 1 connection is being established |
|
B1 |
Unidentified |
Off |
B-channel 1 connection is broken |
|
B2 |
Unidentified |
On |
B-channel 2 connection is good |
|
B2 |
Unidentified |
Blinking |
B-channel 2 connection is being established |
|
B2 |
Unidentified |
Off |
B-channel 2 connection is broken |
|
DT |
Unidentified |
On |
ISDN interface is established. Data transmission is possible |
|
DT |
Unidentified |
Blinking |
ISDN interface is initializing or error is occurring. Data transmission is not possible |
|
DT |
Unidentified |
Off |
ISDN interface is not activated |
|
LNK |
Unidentified |
On |
ISDN link is good |
|
LNK |
Unidentified |
Blinking |
ISDN link is synchronizing |
|
LNK |
Unidentified |
Off |
ISDN link is broken (In Europe this indicates idle status) |
|
P1 |
Unidentified |
On |
Connection is good on voice channel 1 |
|
P1 |
Unidentified |
Blinking |
Outgoing or incoming connection is being established on voice channel 1 |
|
P1 |
Unidentified |
Off |
No activity on voice channel 1 |
|
P2 |
Unidentified |
On |
Connection is good on voice channel 2 |
|
P2 |
Unidentified |
Blinking |
Outgoing or incoming connection is being established on voice channel 2 |
|
P2 |
Unidentified |
Off |
No activity on voice channel 2 |
|
TX-RX |
Unidentified |
Blinking |
Data is being transmitted/received on serial port |
|
TX-RX |
Unidentified |
Off |
Data is not being transmitted/received on serial port |
|
DTE |
Unidentified |
On |
Serial port connection is good |
|
DTE |
Unidentified |
Blinking |
Serial port connection is being established |
|
DTE |
Unidentified |
Off |
Serial port connection is broken |
|
FAULT |
Unidentified |
On |
Software fault condition detected |
|
FAULT |
Unidentified |
Blinking |
Hardware fault condition detected |
|
FAULT |
Unidentified |
Off |
ISDN modem is operating normally |
|
PWR |
Unidentified |
On |
Power is on |
|
PWR |
Unidentified |
Off |
Power is off |